Factory-authorized Dometic serviceSelf-contained units, split DX equipment, chilled-water plants, cabin controls, parts and installation—supplied and serviced by ACCUMAR’s equipment service team across Southwest Florida.
Fort Myers-based mobile service. Typical lead time: 3–4 weeks. Service is by appointment; there is no emergency service. Service is by appointment; there is no emergency service.
The right architecture for the vessel
These are different installation and service paths, not interchangeable products. Capacity, voltage, airflow, seawater supply, controls and access must be confirmed against the exact boat.
Packaged DX cooling
One packaged chassis with compressor and cabin blower. We plan capacity, airflow, voltage, seawater flow, condensate routing and service access before a DTU, Turbo or other model is selected.
Dometic product family (opens in a new tab)Remote condensers + evaporators
Condensing equipment can be separated from cabin air handlers. Current Dometic families include DEUX condensers and EBE, EBLE, EDLE and TVE evaporators; the installed generation, refrigerant and electrical specification determine a viable combination.
Dometic product family (opens in a new tab)Chillers + circulating loops
For multi-zone vessels, we evaluate the chiller modules, chilled-water pumps, expansion, distribution, air handlers and controls as one system. Module selection and refit scope depend on vessel load and existing plumbing.
Dometic product family (opens in a new tab)Dometic equipment sales & support
ACCUMAR is factory-authorized for Dometic marine A/C and chiller equipment in Southwest Florida. Our marine technicians work with equipment documentation and available parts to identify, source, install, commission, and service the correct equipment for the vessel.
Equipment and parts availability is checked for the installed model, voltage and capacity. Supply timing and installation appointments are confirmed separately; service is by appointment with a typical 3–4-week lead time.
Compact Dometic marine air conditioners selected by capacity, voltage, airflow, seawater flow, and available installation space.
Condensing units, air handlers, controls, and replacement planning for quieter multi-zone cabin cooling.
Dometic chilled-water plants, air handlers, pumps, controls, and retrofit planning for larger yachts and multi-zone systems.
ACCUMAR supplies and services Dometic marine air-conditioning equipment as a factory-authorized provider in Southwest Florida.
Displays, boards & climate logic
Control selection and repair depend on the display, board, sensor, harness and climate-system generation. These are representative Dometic controls, not a claim that every model is on our shelves.
Manufacturer product photo
Dometic touchscreen cabin control with setup, status and help functions; compatibility must be checked against the installed system.
Dometic information (opens in a new tab)
Manufacturer product photo
Capacitive-touch cabin controller with model-specific configuration, including humidity and auxiliary-heat options on compatible systems.
Dometic information (opens in a new tab)
ACCUMAR installation photo
Older DX and chilled-water installations require exact display, board, sensor and harness identification before repair or replacement; not every generation is interchangeable.
Dometic information (opens in a new tab)Other installed controls and chiller interfaces are evaluated from the actual system and manufacturer documentation. Read the Dometic fault-code guide.
Field vans + Fort Myers parts base
Our mobile vans carry common Dometic service parts and accessories; our Fort Myers shop keeps a broader parts inventory. As a factory-authorized Dometic service provider, we also have equipment documentation and available parts.
We verify the exact model, voltage, capacity, on-hand stock, supplier timing and service schedule before promising a part, unit, delivery or installation date. The shop is a service base, not an advertised walk-in retail counter.
Installation, diagnostics, repair and commissioning scoped to the installed Dometic system.
Model/serial, electrical specification and supersession checked before orders.
Seawater, electrical, airflow, refrigerant, chilled-water and controls considered together.
New equipment matched to ducting, plumbing, access and control generation.
ACCUMAR field photographs
Project photos show individual vessel systems. They do not represent a universal Dometic product catalog or a guarantee of identical equipment availability.
Business hours: Monday–Saturday, 8:00 AM–6:00 PM. Typical lead time: 3–4 weeks. Service is by appointment; there is no emergency service. Our AI phone receptionist answers calls 24/7. Service is by appointment, not 24/7, and there is no emergency service.
Vessel and dock/yard location, Dometic model and serial number, voltage, controller photo, fault code, affected cabin zones and photos of the installed equipment. See broader marine A/C services.
Select a question to view the answer. Opening another question closes the previous one.
Open ACCUMAR’s verified Jobber Client Hub to submit available request details, review a quote, approve a required deposit, and keep job records in one secure place.
ACCUMAR is factory-authorized for Dometic marine A/C and chiller equipment.
A/C maintenance program: $140 per visit
Most jobs run $200–$400, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Our AI phone receptionist answers calls 24/7. Service is by appointment, not 24/7, and there is no emergency service. Typical lead time: 3–4 weeks.
Request ServiceAwaiting Roland’s real customer questions and answers.
Equipment-specific symptoms, access requirements and information to send before your appointment.