Documented Authorization + Multi-Brand Stabilizer Service
Marine Stabilizer Service & Repair
Fin · Gyro · Hydraulic · Electric Stabilization
equipment supply and service support for Wesmar, Naiad Dynamics, and ABT-TRAC. We also service Keypower by Kobelt and Sleipner Vector Fins™ stabilizers, plus other accepted systems, without implying authorization for those additional brands.
Marine Stabilizer Systems and Technology
Manufacturer names and logos identify equipment serviced. They do not imply authorization. ACCUMAR’s documented equipment supply and service relationships are limited to Wesmar, Naiad Dynamics, and ABT-TRAC.
Marine Stabilizer, Thruster, Steering, and Hydraulic Capability
ACCUMAR Marine Services is an equipment supply and service provider for Wesmar, Naiad Dynamics, and ABT-TRAC in Southwest Florida. We also service Keypower by Kobelt digital fin stabilizers and Sleipner Vector Fins™ systems, alongside other accepted fin and gyro equipment, without implying authorization for those additional brands. Installed equipment is evaluated by make, model, documentation, parts availability, and required tooling before work is accepted.
With decades of marine systems experience and the MCA 200T Master of Yacht credential, we understand stabilizer systems from both the engineering bench and the helm. We know what it feels like when a fin system loses pressure in a beam sea off Sanibel, or when a Seakeeper throws an overheat alarm transiting Gordon Pass. That real-world experience informs every diagnosis we make.
Our recommendations begin with the installed equipment, fault history, vessel access, and operating goals. We explain whether inspection, repair, overhaul, controls work, or a manufacturer-supported replacement path is appropriate before a larger scope is authorized.
Brands We Service, Install & Repair
Confirmed brand relationships and service scope are stated separately so owners and captains can make informed decisions.
Wesmar
Western Marine Electronics — Since 1964
ACCUMAR is factory authorized for Wesmar and provides service support for installed roll-fin stabilizer, thruster, hydraulic-power, and control systems. Exact scope is confirmed from the model, serial data, documentation, access, and parts path.
Vortex Dual Prop Bow Thrusters (7"–48" tunnels)
Roll Fin Stabilizer Systems (DSP 4800 digital control)
Stern Thrusters (hydraulic & electric)
Commercial and pleasure-vessel configurations
Hydraulic power packs & proportional valve systems
Common Issues We Fix:
Hydraulic pump seal failures, DSP control board faults, fin shaft corrosion, proportional valve sticking
ACCUMAR is factory authorized for Naiad Dynamics and provides service support for installed fin-stabilizer, hydraulic, electric, and control systems. Performance and zero-speed functions depend on the exact model, vessel, commissioning, and operating conditions.
Active Fin Stabilizers (Models 162–1400)
MultiSea II Digital Control System
Electric Fin Stabilizer Systems
Zero-speed stabilization at anchor
Retractable fin systems for shallow draft
Common Issues We Fix:
Fin shaft seal leaks, MultiSea II sensor calibration drift, hydraulic fluid contamination, actuator cylinder scoring
ABT-TRAC
Stabilizers · Thrusters · Hydraulics
ACCUMAR is factory authorized for ABT-TRAC and provides service support for installed digital, hydraulic, and electric fin-stabilizer systems. Functions and service requirements are verified from the exact configuration and current documentation.
Digital Stabilization Systems (fins 0.4–4.1 m²)
TRAC-STAR Stabilization at Rest
e-TRAC Digital Electric Stabilizers
Hydraulic Thrusters (8"–28", 7 sizes)
Integrated Hydraulic Power Systems
Common Issues We Fix:
e-TRAC motor controller faults, hydraulic hose degradation, fin bearing wear, TRAC-STAR sensor failures
ACCUMAR evaluates installed Seakeeper gyroscopic stabilizer systems for model-specific service. Scope depends on alarms, operating hours, cooling, electrical supply, access, documentation, required tooling, and parts support.
Supported Seakeeper gyro model families
Seakeeper Ride (interceptor-based trim & stabilization)
Vacuum encapsulated flywheel technology
Integrated cooling systems (raw water & glycol)
Digital control with smartphone app monitoring
Common Issues We Fix:
Heat exchanger scaling/clogging, raw water pump impeller failure, vacuum seal degradation, bearing noise at high hours, coolant loss
Keypower by Kobelt
Digital Roll Fin Stabilizer Systems
ACCUMAR services installed Keypower by Kobelt digital fin-stabilizer systems. Scope is confirmed from the exact model, configuration, documentation, access, parts support, and required tooling.
Digital roll fin stabilizer systems
Dual and quad fin configurations
Fins, mounting collars, shafts, and actuators
Digital control boxes and roll-control inputs
Hydraulic, mechanical, and electrical diagnostics
Common Issues We Fix:
Shaft and seal leakage, actuator or hydraulic faults, control alarms, sensor inputs, wiring, corrosion, and service-access constraints
ACCUMAR services Humphree fin and gyro stabilizer systems. We begin with the installed model, fault history, controls, power, cooling, access, and current manufacturer documentation before defining the work.
Electric fin-stabilizer systems
Underway and model-dependent zero-speed functions
Humphree gyro stabilizer systems
Control displays, sensors, power, and communications
Model-specific inspection and commissioning support
Common Issues We Fix:
Control or sensor faults, actuator or power-supply concerns, cooling alarms on gyro systems, wiring, communications, and installation-specific access
Smartgyro
Marine Gyro Stabilizers
ACCUMAR services Smartgyro marine gyro stabilizers, with scope based on the installed SG-series model, alarms, operating hours, cooling, electrical supply, hydraulic braking system, access, and parts support.
SG20, SG40, SG60, SG80, SG120, and SG150 families
Liquid-cooling system inspection
Control electronics and motion-sensor diagnostics
Hydraulic braking-system inspection
Modular onboard service-access review
Common Issues We Fix:
Cooling-flow or coolant faults, control alarms, sensor inputs, hydraulic-braking concerns, electrical supply, vibration, and access limitations
Sleipner (Side-Power)
Vector Fins™ Stabilizers & Thruster Systems
ACCUMAR services installed Sleipner Vector Fins™ stabilizer and Side-Power thruster systems. Fin, electric or hydraulic actuator, controls, hydraulic power, and thruster scope is confirmed from the installed model, documentation, access, parts support, and required tooling. This is a service-capability statement, not a factory-authorization claim.
Vector Fins™ fin stabilizer systems
Electric and hydraulic fin actuators, as installed
Stabilizer controls and hydraulic power packs
Side-Power bow and stern thrusters
Model-specific diagnostics and service planning
Common Issues We Fix:
Fin or shaft concerns, actuator and hydraulic faults, sensor or control alarms, thruster electrical faults, corrosion, and installation-specific access
Italian-designed bow and stern thrusters with compact, high-efficiency motors. CT series tunnel thrusters and retractable models for performance boats. Known for quiet operation and easy installation.
CT Tunnel Thrusters (35–300 HP)
Retractable Thrusters (no drag penalty)
Composite tunnel options (no corrosion)
Ignition-protected models for gas boats
Proportional & on/off control options
Common Issues We Fix:
Motor overheating from extended use, gear leg seal wear, control relay failures, battery capacity issues
Lewmar Thrusters
Precision Maneuvering — UK Engineering
Electric tunnel thrusters designed for sailboats and motor yachts 25–80 feet. Compact motor design, low noise, and high thrust-to-power ratio. Simple installation with composite or aluminum tunnels.
Electric Bow Thrusters (3–25 kW)
Stern Thrusters for twin installations
Composite tunnel kits (corrosion-free)
Proportional control panels
Retractable thruster options
Common Issues We Fix:
Brush motor wear, tunnel anode depletion, control panel water ingress, battery bank undersizing
Yacht Controller
Wireless Docking Systems — Italy
Wireless remote controls for thrusters, engines, and anchors. Dual-band radio with military-grade encryption. Dock your boat from anywhere on deck. Compatible with all major thruster and engine brands.
Dual Band Wireless Thruster Remotes
Engine & Transmission Wireless Controls
Anchor Windlass Wireless Systems
Dual-station & multi-function remotes
Integration with Side-Power, Wesmar, Max Power
Common Issues We Fix:
Battery replacement, antenna range issues near carbon fiber, pairing/sync failures, relay box corrosion
System Reference Views
Fin, Shaft, Control & Gyro Service Context
These supplied manufacturer and product illustrations help identify the installed system and access requirements. They are not presented as photographs of ACCUMAR project work.
Keypower Shaft & Actuator Service Reference
Supplied system illustration showing shaft, seal, actuator, and hull-access context for model-specific inspection planning.
Keypower Control Reference
Supplied system illustration of roll and fin-control information used when documenting alarms, inputs, and operating behavior.
Fin Stabilizer Configuration
Supplied generic fin-stabilizer illustration for discussing hull access, fin condition, shaft seals, and installation geometry.
Humphree Control Reference
Supplied Humphree control illustration showing trim, list, turn, and stabilization functions for service-intake context.
Gyro Stabilizer Configuration
Supplied generic gyro-stabilizer illustration for discussing access, cooling, electrical supply, controls, and service clearances.
Complete Stabilizer & Thruster Services
From new builds to 30-year-old legacy systems — we handle every aspect of marine stabilization, thruster work, and associated hydraulics.
Real ACCUMAR project
New Installations & Retrofits
Complete stabilizer and thruster installations from engineering to sea trial. Hull survey, tunnel boring, fin pocket fabrication, hydraulic system design, wiring, commissioning, and final sea trial — all under one roof.
Real ACCUMAR project
Service & Repair — Marine Stabilization
equipment supply and service support for Wesmar, Naiad Dynamics, and ABT-TRAC, plus model-specific service capability for Keypower by Kobelt, Sleipner Vector Fins, Humphree fin and gyro systems, Smartgyro gyro stabilizers, Besenzoni, and other accepted installed systems. Scope can include hydraulic pump rebuilds, fin actuator service, hose replacement, cooling checks, and control-system diagnostics.
Real ACCUMAR project
System Upgrades & Conversions
Upgrade legacy analog controls to modern digital systems. Scope can include MultiSea II retrofits, e-TRAC conversions, control modernization, and carefully planned stabilization-system conversion consultations.
Real ACCUMAR project
Preventive Maintenance Programs
Annual and semi-annual inspections can cover hydraulic fluid condition, seals, zinc anodes, fin alignment, cooling-water components, hoses, linkages, alarms, and control-system operation based on the installed equipment.
Real ACCUMAR project
Hydraulic System Overhaul
Complete hydraulic power pack rebuilds, hose fabrication, manifold repair, proportional valve service, and fluid contamination analysis. We maintain the hydraulic heart of your stabilizer system.
Real ACCUMAR project
Electronics & Control Systems
Stabilizer control unit diagnostics, sensor calibration, wiring harness repair, display replacement, and software updates. From legacy analog panels to modern touchscreen interfaces.
Stabilizer Troubleshooting Guide
Recognize these symptoms? Here's what might be happening — and when to call us.
Excessive roll despite system running
Possible causes: Sensor calibration drift, low hydraulic pressure, worn fin bearings, control system fault
What to check: Check hydraulic pressure gauge, verify sensor readings on control display, inspect fin movement visually
Hydraulic fluid in bilge/lazarette
Possible causes: Fin shaft seal failure, hose burst, pump seal leak, fitting failure
What to check: Identify leak source, check fluid level, shut down system if level is critically low
Seakeeper overheating alarm
Possible causes: Clogged raw water strainer, failed impeller, scaled heat exchanger, low coolant
What to check: Check strainer immediately, verify raw water flow, check coolant expansion tank level
Fins won't deploy or retract
Possible causes: Hydraulic pressure loss, actuator failure, control relay fault, limit switch corrosion
What to check: Check hydraulic reservoir level, listen for pump running, check control panel for error codes
Grinding/rumbling noise from gyro
Possible causes: Bearing wear, vacuum loss, flywheel imbalance
What to check: Check vacuum gauge reading, note when noise occurs (startup vs. running), schedule inspection
Thruster not producing thrust
Possible causes: Propeller fouling, motor failure, hydraulic bypass, tunnel obstruction
What to check: Inspect tunnel for marine growth, check hydraulic pressure, verify motor draws current
Don't wait for a small issue to become a catastrophic failure at sea.
Marine Stabilizer Maintenance Schedule
Planned inspections help identify leakage, contamination, corrosion, hose deterioration, cooling restrictions, alarm history, and component wear before reliability is affected.
Routine Checks
Check hydraulic fluid level and condition
Inspect visible shaft seals for weeping
Review controller alarms and service messages
Inspect cooling-water strainers where fitted
Check accessible hoses and fittings for leaks
Annual Inspection
Test hydraulic fluid condition where applicable
Inspect sacrificial anodes and underwater components
Service cooling circuits according to the manufacturer schedule
Check roll sensors and control inputs
Inspect hydraulic hoses for cracking or chafe
Test emergency stop and alarm circuits
Inspect fin bearings, linkages, and actuator pivots
Manufacturer-Scheduled Service
Replace shaft seals at the specified interval
Evaluate hydraulic pump condition
Service coolant and thermostatic components where fitted
Inspect or overhaul actuator cylinders as condition requires
Replace aging or damaged hydraulic hoses
Apply approved controller or firmware updates
ACCUMAR Stabilizer Maintenance Program
Scheduled inspections and documented follow-up recommendations are available by written scope. We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.
Why AMS Stabilizers
Clear brand relationships, documented scope, hydraulic capability, and practical vessel experience support each recommendation.
Equipment Support
equipment supply and service support for Wesmar, Naiad Dynamics, and ABT-TRAC in Southwest Florida.
Decades of Experience
decades of marine systems troubleshooting, repair, refit, and maintenance experience.
MCA 200T Master of Yacht
We understand vessel handling from the helm — our recommendations come from real sea time, not just a service manual.
Hydraulic System Capability
Coordinated capability for pump rebuilds, hose fabrication, manifold repair, cooling, and complete hydraulic system design.
Parts by Specification
Parts and service materials are identified from the installed make, model, serial information, and manufacturer requirements.
24/7 Emergency Service
We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.
Documented Assessments
Recommendations are based on symptoms, testing, access, condition, parts support, and the vessel's operating requirements.
Complete Installations
Application review, fabrication, installation, commissioning, and sea-trial support coordinated through one accountable team.
Gyro vs. Fin Stabilizers: Which Is Right for Your Vessel?
Fin and gyro systems address roll differently. Selection depends on the vessel, operating profile, structure, power, cooling, installation access, manufacturer requirements, and service path.
Factor
Gyro Systems
Fin Systems
Best for vessel size
Confirm from the selected model, vessel structure, and application data
Confirm from the selected model, hull, operating profile, and application data
Roll reduction
Model, vessel, sea-state, speed, and operating-condition dependent
Model, vessel, sea-state, speed, and operating-condition dependent
Works at zero speed
When operating within the selected model's requirements
Only on supported zero-speed configurations
External appendages
None (internal)
Fins protrude below hull
Drag penalty
No external fin appendage; installation weight and operating loads remain
Depends on fin geometry, hull, speed, deployment, and operating condition
Weight added
Model, foundation, cooling, and vessel-installation specific
Model, fin, actuator, hydraulic/electrical, and structural installation specific
Maintenance
Heat exchanger cleaning, coolant, bearings
Hydraulic fluid, seals, zincs, hoses
Typical lifespan
Condition, operating hours, installation, and maintenance dependent
Condition, operating hours, corrosion control, seals, and maintenance dependent
Installation complexity
Moderate (interior space + cooling)
High (hull penetrations + hydraulics)
Not sure which is right for your boat? — we'll assess your vessel and usage pattern.
Compare Stabilizer Brands: Find Your Best Fit
Select a brand to see detailed specs, best use cases, and what makes each system unique.
Seakeeper
Gyroscopic Stabilization
Model, vessel, speed, sea-state, and operating-condition dependent
Roll Reduction
Why choose Seakeeper: Internal gyro configuration avoids an external fin but requires model-specific structure, power, cooling, and service access.
Vessel RangeConfirmed from the selected model and vessel application
Zero SpeedAvailable while operating within the selected model's requirements
Drag PenaltyNo external fin appendage; weight and operating loads remain
Weight ImpactModel and installation specific
Typical CostQuoted after vessel and model review
InstallationInternal structure, access, electrical supply, cooling, and commissioning
LifespanCondition, use, installation, and maintenance dependent
Best ForVessels matched to the selected gyroscopic system and structural requirements
Need help choosing? We review the installed model, vessel requirements, access, and available support before defining service or retrofit scope.
At-a-Glance: Selected Stabilization Systems
Brand
Type
Vessel Size
Roll Reduction
Zero Speed
Cost Range
Seakeeper
Gyroscopic
Confirmed from the selected model and vessel application
Model, vessel, speed, sea-state, and operating-condition dependent
Available while operating within the selected model's requirements
Quoted after vessel and model review
Naiad Dynamics
Active Fin
Confirmed from current model and vessel application data
Model, vessel, speed, sea-state, and operating-condition dependent
Available on supported zero-speed configurations
Quoted after vessel and model review
Wesmar
Active Fin + Thrusters
Confirmed from current model and vessel application data
Model, vessel, speed, sea-state, and operating-condition dependent
Available on supported configurations
Quoted after vessel and model review
ABT-TRAC
Active Fin (Digital & Electric)
Confirmed from current model and vessel application data
Model, vessel, speed, sea-state, and operating-condition dependent
Available on supported configurations
Quoted after vessel and model review
Humphree
Electric Fin / Gyro (model-specific)
Confirmed from current model requirements
Operating-condition and model dependent
Available on supported configurations
Quoted after vessel and model review
Keypower by Kobelt
Digital Roll Fin
Confirmed from vessel and manufacturer application data
Operating-condition and model dependent
Model and configuration dependent
Quoted after vessel and model review
Sleipner Vector Fins™
Fin (electric or hydraulic actuation)
Confirmed from the exact fin, actuator, and vessel application
Model, vessel, speed, sea-state, and operating-condition dependent
Configuration and operating-condition dependent
Quoted after vessel and model review
Smartgyro
Gyroscopic
SG20 through SG150 application ranges
Operating-condition and model dependent
Yes when operating within model requirements
Quoted after vessel and model review
Real Work, Real Results
Recent Stabilizer & Thruster Projects
Actual service photos from ACCUMAR projects in Southwest Florida and selected out-of-area assignments. No stock photos in this project gallery.
Recent ABT-TRAC field work · Hatteras 80
ABT-TRAC fin work on an 80-foot Hatteras
Indiantown Marine Center, Indiantown, Florida
A recent ACCUMAR assignment involving the ABT-TRAC fin-stabilizer system on a hauled 80-foot Hatteras. These first-party photographs show the fin, shaft-area access, removed circular seals, and related hardware.
See the fin under the hull, shaft-access views, and removed components using the ABT-TRAC filter below. Out-of-area projects are evaluated individually; this assignment does not imply routine Indiantown coverage or a facility partnership.
ACCUMAR worked on the ABT-TRAC fin stabilizers of a 100-foot Horizon near Fort Myers. The photographs show a stabilizer fin beneath the hull and the yacht supported ashore.
Two photographs from this separate assignment are also available under the ABT-TRAC filter below.
Marine Stabilizer Service Area
Our core service area is Southwest Florida. Out-of-area assignments, such as the Hatteras fin work at Indiantown Marine Center, are evaluated case by case for access, travel, scope, and scheduling.
Fort Myers
Cape Coral
Naples
Fort Myers Beach
Punta Gorda
Sanibel Island
Marco Island
Bonita Springs
Marine Stabilizer FAQ
Is ACCUMAR factory authorized for stabilizers?
Yes. ACCUMAR is factory authorized for ABT-TRAC, Wesmar and Naiad.
Do you service other stabilizer and thruster brands?
We service other installed systems, such as Sleipner and Side-Power. Those are service capabilities, not factory authorizations.
What does stabilizer service cost?
Labor starts at $160/hr with a 1-hour minimum. Parts and scope are quoted after we review the model, serial data and access.
Do you handle stabilizer emergencies?
Yes. We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.
Do I need to haul out for stabilizer or gyro service?
Not for every assessment. Controls, alarms and some accessible checks may begin afloat, while underwater fins, shafts, seals, bearings, hull work or model-specific gyro access may require a suitable yard and haulout. We confirm the task and access before scheduling.
Do stabilizers work when the boat is at anchor?
It depends on the installed system and controls. Some configurations support zero-speed or at-anchor roll control, while others are intended primarily for operation underway. ACCUMAR confirms the installed make, model and manufacturer documentation rather than assuming at-anchor capability.
What size stabilizer does my vessel need?
Stabilizer sizing depends on vessel displacement, beam, hull form, operating speed, available space, electrical or hydraulic capacity, and intended use. We review the vessel and the selected manufacturer's engineering requirements before recommending a system or retrofit path.
What's the difference between fin stabilizers and gyro stabilizers?
Fin stabilizers use underwater control surfaces to counter roll and may provide underway or zero-speed operation depending on the design. Gyro stabilizers use a rotating flywheel inside the vessel and require suitable structure, space, power, and cooling. The correct approach depends on the vessel and operating profile; the installed make and model determine our service scope.
Can you install stabilizers on an existing vessel?
Yes. A retrofit begins with vessel access, structural, displacement, power, hydraulic, and cooling requirements. Depending on the system, the project may include manufacturer engineering, naval-architecture review, fabrication, controls integration, commissioning, and sea trial.
How often should marine stabilizers be serviced?
Service intervals are set by the system manufacturer, operating hours, age, and condition. A planned inspection can include hydraulic fluid and filter condition, seals, anodes, hoses, linkages, cooling-water components, alarms, and control diagnostics. We confirm the applicable schedule from the installed make and model.
My gyro stabilizer is making noise or showing an over-temperature alarm. What should I do?
Shut down the equipment if the manufacturer directs it or if abnormal noise, heat, leakage, or vibration is present. Restricted cooling water, low coolant, pump or impeller faults, sensor issues, and internal wear are possible causes. Record the exact alarm, operating hours, and model before requesting service; do not assume a bearing failure from sound alone.
Which stabilizer brands does ACCUMAR support?
ACCUMAR is an equipment supply and service provider for Wesmar, Naiad Dynamics, and ABT-TRAC in Southwest Florida. We also service Keypower by Kobelt digital fin stabilizers and Sleipner Vector Fins™ stabilizers, plus Humphree fin and gyro systems, Smartgyro gyros, and other accepted equipment. These additional brand names describe service capability only, not authorization. Scope depends on the installed model, documentation, parts, access, and required tooling.
What does a stabilizer installation cost?
Costs vary substantially with vessel size, access, system type, engineering, fabrication, electrical or hydraulic scope, haul-out requirements, and commissioning. We provide a written scope and estimate after reviewing the vessel and manufacturer requirements.
What areas do you serve for stabilizer installation and service?
We serve all of Southwest Florida including Fort Myers, Cape Coral, Naples, Fort Myers Beach, Punta Gorda, Sanibel, Marco Island, Bonita Springs, and surrounding waterways. Larger installation projects may be evaluated outside Southwest Florida after vessel, facility, travel, scope, and scheduling are confirmed.
What should I do if my stabilizer fins will not retract or deploy?
Deployed fins that will not retract can create haulout, trailering, or shallow-water risk. Stop operating the system, follow the manufacturer’s safe-shutdown guidance, and do not force the fins manually without proper support. Record the model, alarms, position, and any visible leakage before requesting service. We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.
How do I know if my stabilizer system is failing?
Warning signs include: increased roll that the system used to handle, hydraulic fluid on the bilge or lazarette sole, unusual noises from the hydraulic pump, error codes on the control panel, slow fin response, overheating alarms (gyros), and visible fluid weeping at fin shaft seals. Any of these warrant a qualified inspection before further operation; stabilizer failures at sea can be dangerous.
Ready to Stabilize Your Vessel?
For stabilizer alarms, fin or actuator leaks, steering faults, thruster problems, and associated hydraulic work, call with the installed make, model, and symptoms.
Stabilizer Service by Location
We provide marine stabilizer service throughout Southwest Florida. Find your local service area:
Open ACCUMAR’s verified Jobber Client Hub to submit available request details, review a quote, approve a required deposit, and keep job records in one secure place.
ACCUMAR job records and photographs. Job dates, reported faults, findings, repairs and verification are published only when supplied by Roland. Dates are not supplied for these records; this is not a chronological job list.
Actual ACCUMAR service photographs. Each caption retains its own recorded location; these are not all one assignment. No repair outcome is inferred. Select a photograph to enlarge it. Use the arrows or swipe to move through the gallery.
Assembled cylindrical hardware and a round component on a stainless-steel shop workbench. Undated owner record: hardware at the shop; vessel at Gulf Harbour Yacht Club, Fort Myers.
Cylinder bodies, rods, fasteners and related components arranged on a shop workbench beside a vise. Undated owner record: hardware at the shop; vessel at Gulf Harbour Yacht Club, Fort Myers.
Disassembled hardware arranged on a bench mat with a caliper nearby. Undated owner record: hardware at the shop; vessel at Gulf Harbour Yacht Club, Fort Myers.
Workbench view of disassembled cylinder and lock-pin hardware beside shop tools. Undated owner record: hardware at the shop; vessel at Gulf Harbour Yacht Club, Fort Myers.
ACCUMAR is factory-authorized for ABT-TRAC, WESMAR and Naiad. Other listed brands are service capabilities, not implied factory authorizations.
Typical price ranges
Stabilizers, Generators & Watermakers
Quoted after an inspection. Labor starting at $160/hr, 1-hour minimum.
Thrusters
Thruster service and repair
Most jobs run $800–$2,000, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Diagnostic visit
Most jobs run $200–$400, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.