Marine systems · Southwest Florida

Glendinning installation, service & repair

Onboard paired Glendinning Cablemaster units and yellow shore-power cables

Power cable handling, engine controls, hose reels and synchronizers deserve more than a catalog listing. ACCUMAR works on Glendinning systems aboard yachts and boats—from identifying a fault to planning a model-specific installation.

ACCUMAR is factory-authorized for Glendinning engine/shift controls and Cablemaster. Other marine product requests are assessed by model; complete-line inventory and universal vessel compatibility are not promised.

Available 24/7 · (239) 323-9600 We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.

Two installed Glendinning Cablemaster shore-power cord handling units inside a vessel compartment
ACCUMAR field photo · paired onboard Cablemaster units
Glendinning equipment we serviceGlendinning manufacturer logo

Manufacturer-identified marine systems

The systems behind a cleaner helm and deck

These manufacturer product images illustrate equipment families, not specific ACCUMAR installations. See the separate onboard photos below for actual field work.

Manufacturer product image of a Glendinning CM-series Cablemaster with yellow shore-power cord
Shore power cable handling

Cablemaster

CM and CR-series systems use different cable paths, mounting arrangements and power supplies. We assess the installed unit, cord, guide rollers, switches and compartment access before proposing service or a new installation.

Manufacturer product details (opens in a new tab)
Manufacturer product image of a Glendinning twin-lever marine engine control head
Throttle and shift

Complete Controls electronic engine controls

Control heads, processors, stations, harnesses and mechanical actuators are reviewed against the engine and transmission installation. Diagnostics, upgrades and commissioning depend on the exact equipment generation.

Manufacturer product details (opens in a new tab)
Manufacturer product image of a white Glendinning Hosemaster reel
Marine water-hose management

Hosemaster

Freshwater and washdown hose-reel installations start with the appropriate S, M or LW model, hose run, mounting, water connection and available power. A site review determines the installation approach.

Manufacturer product details (opens in a new tab)
Manufacturer product image of a Glendinning ProPilot marine joystick control
Joystick system integration

ProPilot

ProPilot is part of the manufacturer's Complete Controls family. Vessel-specific propulsion, thruster, software and electrical compatibility must be established before an integration or retrofit is proposed.

Manufacturer product details (opens in a new tab)

Diagnose · install · integrate

A practical service path, from the component to the vessel

The label and installation tell us which system is actually aboard. We then check its electrical and mechanical interfaces, safe access, manufacturer documentation and parts options before proposing a repair, replacement or new installation.

Explore AMS Systems

Product Installation

Cablemaster and Hosemaster mounting, routing, electrical or water connections, access and operational checks evaluated for the vessel.

Electronic Engine Controls

Control-head, processor, harness, station, actuator and interlock issues reviewed against the actual propulsion setup.

Synchronizer Installation & Service

Automatic Synchronizer drive, cabling, tach reference, adjustment and integration evaluated against the installed engine controls.

ProPilot integration

Joystick and thruster interfaces assessed for model-specific compatibility, installation access and commissioned behavior.

Marine control cables & drive components

We also review Glendinning Pro-X marine control cables and rotary-drive/synchronizer adapters where fitted. Selection and service depend on the exact engine-control arrangement and manufacturer documentation. Manufacturer cable families (opens in a new tab).

Twin-engine support

Automatic Synchronizer service

For a Glendinning Automatic Synchronizer, we first identify its drive adapter, throttle-cable path, tach inputs and installed controls. Test findings determine whether adjustment, component repair or a broader engine-control review is appropriate.

Explore Glendinning synchronizers (opens in a new tab)

Safety before cycling a fault

Shore-power and propulsion controls are safety-critical. Do not handle a damaged energized shore cord or operate a control system that does not respond as expected. Isolate the equipment as appropriate, follow the vessel's safety procedures and provide the model and symptom details when requesting service.

Actual ACCUMAR project photographs

A closer look at onboard cable handling

These photographs show actual Cablemaster equipment and related parts aboard a vessel, including owner-supplied installation and relay detail views. Product renders elsewhere on this page are manufacturer imagery. No completion or performance outcome is inferred from a photo.

Two Glendinning Cablemaster units with yellow shore-power cable mounted side by side aboard a vessel
Paired units and routed shore-power cables in an onboard equipment compartment.
Owner-supplied view of two cable guides with yellow shore-power cords routed through an onboard compartment
Close view of the cable guides, supports and two shore-power cord runs.
Owner-supplied overview of Cablemaster units, reels and adjacent service access inside a vessel
Compartment overview showing the reel positions and neighboring systems.
Onboard Glendinning Cablemaster reel assembly, cable path and mounting hardware
Reel assembly, mounted hardware and cord path from a second angle.
Owner-supplied close-up of a Glendinning Cablemaster relay assembly and its wiring terminals
Cablemaster relay assembly and wiring detail. Electrical work requires isolation and qualified testing.

See more genuine ACCUMAR work in the project gallery.

Plan the right visit

Tell us what is aboard

Send vessel location, product model and serial number, photos of the unit and controller, the fault or desired upgrade, and safe-access details. We will review equipment-specific scope and availability; no dispatch, parts or repair completion time is promised before confirmation.

Available 24/7 · (239) 323-9600 Hours: Monday–Saturday, 8:00 AM–6:00 PM. We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.

Request a Glendinning Quote

Use the service form to describe the equipment; the secure Jobber quote option is below.

(239) 323-9600
Common Questions

Glendinning marine product questions

Select a question to view the answer. Opening another question closes the previous one.

Clear scope. Written estimate.

Tell us what the vessel needs.

Open ACCUMAR’s verified Jobber Client Hub to submit available request details, review a quote, approve a required deposit, and keep job records in one secure place.

Recent Jobs

ACCUMAR job records and photographs. Job dates, reported faults, findings, repairs and verification are published only when supplied by Roland. Dates are not supplied for these records; this is not a chronological job list.

Actual ACCUMAR service photographs. Each caption retains its own recorded location; these are not all one assignment. No repair outcome is inferred. Select a photograph to enlarge it. Use the arrows or swipe to move through the gallery.

Engine-room view showing adjacent propulsion machinery and a control panel. Provided as onboard context only; it does not document engine work.

Related ACCUMAR service

Corridor view toward the machinery space. Provided as onboard context only; it does not document engine work.

Related ACCUMAR service

Dometic SeaXchange XTC cabinet beside the membrane rack and filter housings.

Related ACCUMAR service

Visible Dometic SeaXchange Sea Water Reverse Osmosis and XTC identification on the cabinet.

Related ACCUMAR service

Membrane rack, watermaker cabinet, and filter housings visible in the system space.

Related ACCUMAR service

Engine-room fan/blower in the upper middle of the equipment space, with a VacuFlush toilet system below. Vessel, location and work performed are not assigned.

Related ACCUMAR service

Roland's field tip

Awaiting Roland's answer in his own words.

From the Shop
View ACCUMAR job photos

ACCUMAR is factory-authorized for Glendinning engine/shift controls and Cablemaster. Glendinning is not a generator brand.

Typical price ranges

Diagnostic visit

Most jobs run $200–$400, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.

We're available 24/7. Call (239) 323-9600 anytime, day or night, and we'll get you to our team. Emergency service is available.

Request Service
Call Now