HomeMonitoring Systems

Monitoring Systems

Know what's happening on your boat 24/7. We install and configure battery monitors, bilge alarms, tank level sensors, temperature monitoring, and remote access systems that send alerts straight to your phone. Prevent small problems from becoming expensive emergencies.

Project-Based Pricing24/7 remote access

What We Monitor

From basic battery monitoring to full vessel awareness — we install systems that keep you informed and your boat safe.

Battery Monitoring

Victron SmartShunt, BMV-712, and Cerbo GX battery monitoring. Real-time state of charge, voltage, current, consumption history, and remaining runtime on your phone.

Tank Level Monitoring

Fuel, water, waste, and holding tank level sensors with remote readout. Know your tank levels from the helm or your phone without manual checking.

Bilge Monitoring & Alarms

High-water bilge alarms with remote notification. Track bilge pump cycle counts and run times to detect slow leaks before they become emergencies.

Temperature & Humidity

Cabin, engine room, and refrigeration temperature monitoring. Humidity tracking to prevent mold. Alerts when temperatures exceed safe ranges.

Shore Power Monitoring

Shore power connection status, voltage monitoring, and reverse polarity detection. Get alerted immediately if shore power disconnects while you're away.

Remote Access & Alerts

Victron VRM portal, Siren Marine, or Maretron N2KView for 24/7 remote access. Push notifications, email, and SMS alerts for any parameter that needs attention.

Monitoring Packages

Basic

From $350

Essential battery monitoring

  • Victron SmartShunt
  • Phone app (Bluetooth)
  • State of charge
  • Voltage & current
  • Consumption history
Get a Quote
Most Popular

Standard

From $1,500

Full vessel monitoring with remote access

  • Victron Cerbo GX
  • Remote VRM portal access
  • Battery monitoring
  • Tank level sensors
  • Temperature sensors
  • Bilge pump monitoring
  • Shore power alerts
Get a Quote

Premium

From $3,000

Complete vessel intelligence

  • Cerbo GX + GX Touch display
  • Cellular gateway
  • All Standard features
  • Smoke/CO detection
  • Door/hatch sensors
  • Camera integration
  • Custom alarm profiles
  • SMS & email alerts
Get a Quote

Prices include equipment and installation. Actual cost depends on vessel size and sensor count. Standard service labor is available starting at $160 per hour with a one-hour minimum unless different project pricing is specified in writing.

Why Monitor Your Vessel

Early Warning

Catch problems before they become emergencies. A bilge alert at 2am is better than a sinking at 6am.

Peace of Mind

Check your boat's status anytime from your phone. Know that everything is normal while you're at home.

Trend Tracking

Historical data shows battery degradation, bilge pump frequency changes, and other trends that predict failures.

Insurance Value

Some insurers offer discounts for monitored vessels. Documentation of system health supports claims if needed.

Monitoring Systems FAQ

What is a marine monitoring system?
A marine monitoring system tracks critical vessel parameters in real time — battery voltage, tank levels, bilge status, temperature, shore power connection, and more. Modern systems send alerts to your phone when something needs attention, even when you're not on the boat. This prevents small problems from becoming expensive emergencies.
Can I monitor my boat remotely from my phone?
Yes. We install and configure systems that give you real-time access to your boat's status from anywhere with cell service. You'll see battery state of charge, shore power status, bilge pump activity, cabin temperature, and more. Alerts are sent via push notification, email, or SMS when thresholds are exceeded.
What brands of monitoring systems do you install?
We work with Victron Energy (Cerbo GX/GX Touch with VRM portal), Maretron (NMEA 2000 vessel monitoring), Siren Marine (cellular monitoring), and BEP (CZone digital switching). The right system depends on your vessel size, existing equipment, and monitoring needs. We'll recommend the best fit during consultation.
How much does a monitoring system cost to install?
Basic battery monitoring (Victron SmartShunt + phone app) starts around $200 plus installation. A full vessel monitoring system with remote access (Victron Cerbo GX + sensors + cellular) typically runs $1,500-$3,500 installed depending on the number of sensors and complexity. Standard service labor is available starting at $160 per hour with a one-hour minimum unless different project pricing is specified in writing. Call for a specific quote.
What's the difference between a battery monitor and a vessel monitoring system?
A battery monitor (like a Victron SmartShunt or BMV-712) tracks battery state of charge, voltage, current, and consumption. A vessel monitoring system goes further — it monitors batteries plus bilge pumps, tank levels, shore power, temperature, humidity, door/hatch sensors, and smoke/CO detectors. It's the difference between watching one thing and watching everything.
Do I need cell service at my marina for remote monitoring?
Yes, for real-time remote monitoring you need cellular connectivity at your slip. Most marinas in Southwest Florida have adequate coverage. For marinas with weak signal, we can install a cellular booster. Some systems also work over Wi-Fi if your marina provides it. We'll assess connectivity during the site visit.

Monitoring System Installation Areas

Professional installation at your dock, marina, or boatyard throughout Southwest Florida

Fort MyersCape CoralNaplesSanibel IslandFort Myers BeachPunta GordaBonita SpringsMarco IslandPine IslandCaptiva IslandNorth Fort MyersPort CharlotteEnglewoodSarasota

Start Monitoring Your Vessel

Don't find out about problems the hard way. A monitoring system pays for itself the first time it catches something. Call us to discuss the right setup for your boat.

Build a Documented Maintenance History

Scheduled inspections and retained service history can support earlier, evidence-based repair decisions. Plans start at $129 per month.

Captain's Maintenance Bulletin

Seasonal checklists, diagnostic tips, and marine AC insights from decades of experience in the field. No fluff — just what works.

Free. No spam. Unsubscribe anytime.

Clear scope. Written estimate.

Tell us what the vessel needs.

Open ACCUMAR’s verified Jobber Client Hub to submit available request details, review a quote, approve a required deposit, and keep job records in one secure place.

© 2026 ACCUMAR Marine Services. Marine Monitoring Systems in Fort Myers, Cape Coral, Naples & Southwest Florida.

Pricing & Payment FAQ

Recent Jobs

ACCUMAR job records and photographs. Job dates, reported faults, findings, repairs and verification are published only when supplied by Roland. Dates are not supplied for these records; this is not a chronological job list.

Awaiting Roland's job write-up and matching photos.

Boat make/model · job date · reported problem · findings · completed work · verification · original job photos.

Regional photographs do not establish a local assignment. We will add matched town-job photographs when Roland confirms them.

Roland's field tip

Awaiting Roland's answer in his own words.

From the Shop
View ACCUMAR job photos

Typical price ranges

Diagnostic visit

Most jobs run $200–$400, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.

Our AI phone receptionist answers calls 24/7. Service is by appointment, not 24/7, and there is no emergency service. Typical lead time: 3–4 weeks.

Request Service

Frequently Asked Questions

Awaiting Roland’s real customer questions and answers.

Call Now