Self-Contained Units
Compact Dometic marine air conditioners selected by capacity, voltage, airflow, seawater flow, and available installation space.
Marine Repair Services Fort Myers
Every boat is different, so pricing depends on the system, access, and what it takes to do the job right.
Rather than guessing over the phone, we start with a short onboard visit to confirm what's going on — no "parts roulette," no repeat trips.
Request a Project QuoteClear next steps
What happens after you contact ACCUMAR
Complex yacht systems are easier to solve when the symptoms, access, equipment, and operating conditions are documented before parts are ordered.
Share the system and symptoms
Send the vessel, system make and model, fault codes, symptoms, location, access details, urgency, and useful photos so the right technician and tools can be assigned.
Diagnose before replacing parts
The onboard visit verifies the failure, records findings, and separates the root cause from secondary symptoms. Parts and equipment are matched to the exact model, voltage, capacity, and vessel constraints.
Approve the scope and schedule
ACCUMAR explains the recommended work, access or haul-out requirements, parts path, and scheduling considerations before proceeding. Appointments depend on safe access, technician and parts availability.
Dometic equipment sales & support
Dometic marine AC units, parts, installation, and service
ACCUMAR is factory-authorized for Dometic marine A/C and chiller equipment in Southwest Florida. Our marine technicians work with equipment documentation and available parts to identify, source, install, commission, and service the correct equipment for the vessel.
Model-specific service and parts assessment
Parts selected for the installed Dometic model
Installation and diagnostic support
Equipment matched to model, voltage, capacity, and space
Equipment and parts availability is checked for the installed model, voltage and capacity. Supply timing and installation appointments are confirmed separately; service is by appointment with a typical 3–4-week lead time.
Split Systems
Condensing units, air handlers, controls, and replacement planning for quieter multi-zone cabin cooling.
Chiller Systems
Dometic chilled-water plants, air handlers, pumps, controls, and retrofit planning for larger yachts and multi-zone systems.
ACCUMAR supplies and services Dometic marine air-conditioning equipment as a factory-authorized provider in Southwest Florida.
Equipment supply and service
Wesmar — equipment supply and serviceABT-TRAC — equipment supply and serviceNaiad — equipment supply and serviceOne technical team
Systems and brands coordinated across the vessel
Brand names identify equipment ACCUMAR installs, services, diagnoses, or integrates. Authorization applies only where expressly stated: Dometic equipment service provider/service and Wesmar, ABT-TRAC, and Naiad equipment supply and service. All other names describe equipment experience only.
Filter by AMS division
Showing 7 of 7 divisions
HVAC & Refrigeration
Air conditioning, chillers, refrigerators, freezers, cold plates, ice systems, controls, pumps, and seawater circuits.
DometicWebastoMarine AirCruisairCondariaFlagshipVitrifrigoIsothermSea FrostTechnautics / CoolBlueSub-Zero
Explore this AMS division Hydraulics & Motion
Steering, thrusters, cylinders, pumps, valves, hoses, cranes, davits, gangways, hydraulic power, and get-home systems.
WesmarABT-TRACNaiadBesenzoniSeaStar / HynauticReversoRexrothEatonParker
Explore this AMS division Stabilizers
Fin and gyro stabilizers, actuators, shafts, seals, bearings, hydraulic power, cooling, controls, alarms, installation support, and commissioning.
WesmarNaiad DynamicsABT-TRACKeypower by KobeltSleipnerHumphreeSmartgyroSeakeeperBesenzoni
Explore this AMS division Electrical & Electronics
AC/DC power, charging, lithium integration, radar, sonar, thermal imaging, satellite connectivity, MFDs, and NMEA networks.
Victron EnergyMastervoltProMarinerBalmarBlue Sea SystemsGarminFurunoRaymarineSimradB&GFLIRStarlinkLumitecORCA
Explore this AMS division Rigging & Sail Systems
Standing and running rigging, furling, mast and spar hardware, winches, terminals, inspection, tuning, and custom cable work.
HarkenProfurlFacnorSchaeferSeldénSouthern SparsSparcraftLewmarANDERSENSta-LokRonstanKOS
Explore this AMS division Mechanical & Propulsion
Diesel engines, generators, cooling circuits, fuel systems, exhaust, transmissions, controls, and auxiliary propulsion integration.
MANCaterpillarCumminsVolvo PentaYanmarMTUJohn DeereNorthern LightsKohlerWesterbekeOnanGlendinning
Explore this AMS division Water, Pumps & Vessel Systems
Watermakers, freshwater and sanitation systems, bilge and circulation pumps, filtration, Cablemaster systems, and monitoring.
SpectraVillage MarineSea RecoveryFCIRainmanSea XchangeDometicJabscoRaritanSeaLandHeadhunterDepco Pump
Explore this AMS division decades of hands-on experience
Mobile service across Southwest Florida
System-level diagnostics before parts
Service by appointment — no emergency service
Service Categories
Professional marine systems service — not a handyman operation. We specialize in complex diagnostics, documented manufacturer-supported work where stated, and complete system installations.
Marine Air Conditioning & Refrigeration
Dometic equipment and parts sales plus installation, diagnostics, and service by marine technicians with equipment documentation. Other brands are evaluated by model and job scope.
Call for Best PriceFull system installations
System diagnostics & performance testing
Compressor replacement & rebuild
Raw water system flush & descaling
Thermostat & control board replacement
Complete AC system installation & commissioning
Dometic self-contained, split & chiller equipment sales
Common Dometic parts inventory & direct factory sourcing
Chilled water system design & service
Refrigeration system recharge & leak repair
Marine refrigerator & freezer installation
Call for Best Price (Full system installations)
Hydraulic Systems
Hydraulic steering, stabilizers, thrusters, cylinders, pumps, valves, hoses, cranes, davits, gangways, and related controls. No factory-service authorization is claimed for these equipment brands.
Hydraulic steering diagnostics & repair
Helm pump rebuild & replacement
Cylinder reseal & pressure testing
Hydraulic fluid flush & bleed
Autopilot hydraulic drive service
Stabilizer system service (Naiad, Wesmar)
Engine & Mechanical
Comprehensive diesel and gas engine service. Troubleshooting, diagnostics, and repair — not oil changes and zincs. We solve the problems other shops can't find.
Engine diagnostics & fault tracing
Fuel system troubleshooting & repair
Cooling system service & heat exchanger rebuild
Transmission service & adjustment
Exhaust system inspection & repair
Full engine annual service (all fluids, filters, belts, impeller)
Generator service & repair (Onan, Kohler, Westerbeke, Northern Lights)
Rigging & Sailing Systems
Service and installation support for Harken, Profurl, Schaefer, Ronstan, and other major rigging hardware. Standing and running rigging inspection, replacement, and tuning.
Call for Best PriceFull rigging replacement
Standing rigging inspection with written report
Running rigging replacement (halyards, sheets, control lines)
Furler service & rebuild (Profurl, Harken, Schaefer)
Winch service & rebuild
Mast step / unstep coordination
Chainplate inspection & replacement
Call for Best Price (Full rigging replacement)
Marine Electrical & Power Systems
Marine electrical diagnostics and installation including battery systems, inverters, solar, shore power, lighting, charging, and complete rewiring.
Electrical system inspection & load analysis
Battery bank design & installation (AGM, LiFePO4)
Victron inverter/charger installation & programming
Solar panel installation with charge controller
Shore power system troubleshooting & repair
LED lighting upgrade
High-output alternator installation & lithium integration
Marine Plumbing & Pumps
Marine pump and plumbing diagnostics, installation, and repair for AC circulation, freshwater, bilge, engine-cooling, holding-tank, and watermaker systems.
AC circulation pump replacement & sizing (Scot, Oberdorfer, Calpeda, March)
Freshwater pressure pump service & replacement
Engine raw water pump service & impeller replacement
Holding tank system service
Watermaker service & membrane replacement
Through-hull inspection & replacement
Bilge pump installation & wiring
Marine Electronics & Navigation
Installation, diagnosis, and integration of radar, sonar, thermal vision, Starlink, multifunction displays, GPS, transducers, and NMEA 2000 networks.
Chartplotter / MFD installation & configuration
Radar installation & calibration
Depth sounder, fish finder & transducer integration
Furuno & Wesmar scanning-sonar service
FLIR thermal imaging & low-light camera integration
Starlink & onboard connectivity installation
NMEA 2000 network design & troubleshooting
Compliance, Safety & Captain Services
MCA 200T Master of Yacht credential. Technical systems inspections, safety preparation, vessel relocation, and sea trials. Not a SAMS/NAMS marine survey.
charter-vessel safety inspection preparation
Pre-purchase technical systems inspection
Vessel relocation & delivery
Sea trial with performance documentation
Fire suppression system inspection
EPIRB / PLB testing & registration
Common Questions
Marine Service Questions — Southwest Florida
Select a question to view the answer. Opening another question closes the previous one.
Request a Project Quote
Describe your project and we'll get back to you with a scoped quote. No obligation.
Standard service labor: starting at $160 per hour with a one-hour minimum
Ready to Get Started?
All work is quoted on a project basis — you'll know the cost upfront before we start.
Standard service labor is available starting at $160 per hour with a one-hour minimum. Other rates or project pricing may apply.
Recent Jobs
ACCUMAR job records and photographs. Job dates, reported faults, findings, repairs and verification are published only when supplied by Roland. Dates are not supplied for these records; this is not a chronological job list.
Awaiting Roland's job write-up and matching photos.
Boat make/model · job date · reported problem · findings · completed work · verification · original job photos.
Regional photographs do not establish a local assignment. We will add matched town-job photographs when Roland confirms them.
Typical price ranges
HVAC & Refrigeration
- A/C service and repair
- Typical A/C repair is $160–$850 on average. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- A/C compressor replacement
- Compressor replacement is $600–$1,800, depending on the unit. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- A/C pump replacement
- Most jobs run $1,000–$1,500, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- A/C unit replacement (one unit)
- Most jobs run $4,500–$7,000, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- Chiller service
- Most jobs run $550–$900, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- Refrigeration repair
- Most jobs run $400–$850, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- Fridge, freezer or ice maker replacement
- Most jobs run $1,300–$3,100, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
A/C maintenance program: $140 per visit
Thrusters
- Thruster service and repair
- Most jobs run $800–$2,000, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Hydraulics & Steering
- Hydraulic and steering repair
- Most jobs run $750–$2,350, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Electrical & Electronics
- Smaller electronics jobs
- Most jobs run $400–$950, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
- Battery bank replacement
- Most jobs run $1,750–$4,200, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Full MFD and radar refits: about $3,500 to over $27,000, mostly hardware. Parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Stabilizers, Generators & Watermakers
Quoted after an inspection. Labor starting at $160/hr, 1-hour minimum.
Diagnostic visit
Most jobs run $200–$400, parts included, before tax. Every boat is different, and we confirm the price after we look at it. Labor starts at $160/hr with a 1-hour minimum.
Our AI phone receptionist answers calls 24/7. Service is by appointment, not 24/7, and there is no emergency service. Typical lead time: 3–4 weeks.
Request ServiceFrequently Asked Questions
Awaiting Roland’s real customer questions and answers.
Focused service pages
Equipment-specific symptoms, access requirements and information to send before your appointment.