Sanibel Marina
Sanibel marina
ACCUMAR Marine Services coordinates mobile diagnostics, repair, installation, and maintenance across seven technical divisions, from marine HVAC and refrigeration to hydraulics, stabilizers, rigging, electrical, electronics, diesel, generators, watermakers, and pumps.
Over private, commercial and government vessels. decades of hands-on experience. ABYC and EPA 608 credentials. Fort Myers-based mobile service across Southwest Florida, subject to travel scope, property permission, safe vessel access, and scheduling availability. Typical lead time: 3–4 weeks. Service is by appointment; there is no emergency service.
Fort Myers-based mobile service
Choose the town where the vessel is kept for local systems work, marina and residential-dock access, and service-specific links. Listed areas are not additional offices. Travel, facility permission, safe access and scheduling are reviewed for every request.
Mobile yacht A/C, refrigeration and systems service from ACCUMAR's Fort Myers base, with work arranged at docks, marinas and private waterfront locations.
Explore local serviceCanal docks, lifts and Tarpon Point. A/C, refrigeration and raw-water work.
Explore local serviceMobile yacht-systems service for Punta Gorda marinas, Charlotte Harbor storage yards, canals and private docks.
Explore local serviceMobile boat A/C, rigging and systems service for Estero Island, San Carlos Island, local marinas and private docks.
Explore local serviceYacht A/C, cooling, engine, plumbing and systems service at North Fort Myers marinas, canal homes and docks.
Explore local serviceRigging, chiller and yacht systems service for Naples Bay sailboats, charter boats and power catamarans.
Explore local serviceMobile yacht-systems service for Marco Island marinas, canal docks and private waterfront access points.
Explore local serviceThrusters, stabilizers and hydraulics while the boat is hauled at Owl Creek.
Explore local serviceRigging, shore power and electronics for boats at Sanibel Marina and island docks.
Explore local serviceMast repairs, standing rigging and DC power for Port Charlotte boatyards.
Explore local serviceOther waterfront locations may be considered case by case. A missing town page does not mean we refuse that location; call to confirm travel and technical scope.
We are not a general contractor who happens to work on boats. We are marine systems specialists with decades of focused experience in the systems that matter most.
We test the reported symptoms and installed system before recommending scope. Measurements, equipment identity, and observations are recorded.
Mobile visits are arranged after the work, travel, property permission, safe access, equipment, and required tooling are confirmed.
ABYC-certified technical capability, EPA 608 refrigerant credentials, and relationship-specific manufacturer wording.
We explain the findings, available options, and tradeoffs before a larger repair or installation scope is authorized.
One accountable intake path connects owners and captains with the relevant ACCUMAR division without overstating what can be completed during a single visit.
Repair, installation, flush and descaling, and maintenance for supported marine AC equipment. EPA Section 608 credentials apply to refrigerant work.
Galley fridges, fish boxes, cold plates, ice makers. Vitrifrigo, Isotherm, Sea Frost, and more.
Standing and running rigging, furling systems, mast work, rigging inspections. Harken, Profurl, Selden.
Lithium conversions, shore power, rewiring, panel upgrades, Victron Energy systems, battery testing.
Hydraulic fill, seal replacement, cylinder repair, Wesmar and Naiad stabilizer service.
Technical systems and condition inspections, lightning-damage assessments, and Coast Guard compliance preparation. Not SAMS/NAMS marine surveys; the Coast Guard retains final authority, and insurer or lender acceptance is not guaranteed.
Westerbeke, Kohler, Onan generator repair, service, and installation. Descaling and load testing.
Spectra, Sea Recovery watermaker service. Marine pump repair — AC, bilge, freshwater, engine cooling.
This matrix states ACCUMAR's published scope without making unsupported claims about other Southwest Florida companies.
| Capability | Published scope |
|---|---|
| Marine HVAC & Refrigeration | Diagnostics, repair, maintenance, design, equipment selection, and installation |
| Hydraulics & Stabilizers | Steering, cylinders, pumps, hoses, controls, fin systems, gyros, and commissioning support |
| Mechanical Systems | Diesel and outboard diagnostics, generators, fuel, cooling, exhaust, and installation work |
| Sailboat Rigging | Standing and running rigging, furling, mast work, swaging, splicing, and technical inspections |
| Electrical & Electronics | AC/DC systems, batteries, charging, navigation, radar, sonar, thermal imaging, and networks |
| Vessel Systems | Watermakers, pumps, Cablemasters, controls, monitoring, and integrated system work |
| Mobile Service | Fort Myers base with Southwest Florida visits arranged by access, travel, and scope |
| Documented Intake | Vessel details, photos, diagnostics, written scope, approvals, and records through Jobber |
This regional list covers verified marina and storage locations outside the five city-page sets, including Sanibel, Captiva, Pine Island, Bonita Springs, Marco Island, Sarasota, and Longboat Key.
Sanibel marina
Wet, transient & dry storage
Captiva resort marina
Coordinate resort and dock access in advance.
Official facility sourcePine Island marina & service
Pine Island storage & service
Bonita Springs marina
Confirm community and property access.
Official facility sourceMarco Island marina association
Confirm marina-association access.
Official facility sourceMarco Island marina
Confirm outside-vendor access.
Official facility sourceSarasota marina
Longboat Key resort marina
Resort or club authorization required.
Official facility sourceRegional residential-dock and boat-lift service is available by arrangement. Travel scope and access depend on the vessel location, owner or tenant permission, community rules, parking, insurance, and technician availability.
Facility names define geographic coverage only. Listing a property does not imply affiliation, preferred-vendor status, guaranteed entry, or prior ACCUMAR work at every location. Confirm marina, yard, club, community, insurance, and property requirements before dispatch.
Facility names and operating-status references were checked against public operator, owner, municipal, or county sources in September 2026. Confirm current conditions when scheduling.
ACCUMAR Marine Services provides mobile yacht systems service based in Fort Myers, Florida, providing comprehensive boat repair and marine service throughout Southwest Florida. The seven-division structure gives vessel owners and captains one accountable intake path for multiple onboard systems while keeping each technical scope clear.
Accepted work can span marine air conditioning repair and marine refrigeration service to sailboat rigging, marine electrical audits, marine steering and boat steering repair across SWFL, including mobile diagnostics for helms, pumps, cylinders, rams, hoses, fittings, leaks, air intrusion, and steering play, plus marine generator descaling. Equipment, access, documentation, parts support, and required tooling determine the final service scope.
Our mobile service covers Southwest Florida marinas, boatyards, storage facilities, clubs, residential docks, and boat lifts from Sarasota and Venice through Charlotte Harbor, Lee County, Collier County, and Marco Island. Travel scope, facility rules, private- property authorization, gates, parking, and insurance requirements are confirmed before dispatch.
We specialize in the marine systems that keep your vessel safe, comfortable, and operational: marine climate control (AC and refrigeration), marine electrical systems (lithium conversions, Victron Energy, shore power), sailboat rigging and furling systems (Harken, Profurl, Selden, Schaefer), and technical systems and condition inspections, including charter-vessel preparation support and lightning-damage assessments. These are not SAMS/NAMS surveys or substitutes for insurer-required surveys. We also provide engine room cleaning and greasing, teak cleaning, and marine watermaker service.
Service work starts with structured intake and diagnostic testing. Recommendations are tied to recorded measurements, equipment identity, observed condition, and available documentation. ACCUMAR documents ABYC-certified technical capability, EPA 608 refrigerant credentials, and equipment service. Other manufacturer relationships are stated separately on the relevant service page.
See the focused Fort Myers yacht systems specialist page and Cape Coral mobile marine mechanic page for city-specific scope and access details.
Looking for a marine service in Southwest Florida you can trust? Call ACCUMAR at 239-323-9600 or book service online. Typical lead time: 3–4 weeks. Service is by appointment; there is no emergency service. Timing for urgent or standard work is confirmed only after the vessel, location, access, equipment, and current workload are reviewed.
Real work from real jobs across Southwest Florida. Marine AC repair, refrigeration, rigging, electrical, generators, and more.
Want to see more? Follow us on social media or request mobile service.
Seasonal checklists, diagnostic tips, and marine AC insights from decades of experience in the field. No fluff — just what works.